I recently made some new towels from my Towel Topper Pattern. I still find these towels super handy around the house. When they get too old and ratty I toss them out and get to make more!
If you’re interested in making a few towel toppers of your own you can download the PDF pattern here (towel_topper) and the original tutorial is posted here. If you have a larger towel that you need to make a topper for just enlarge the pattern a bit.
Be sure to let me know how your towels turn out!
I have this vintage towel from my Grandmother with a fabric topper that buttons around a towel bar. We use it all the time and I’m afraid we’ll wear it out. To make more I started collecting little vintage handtowels and made a pattern for the topper. They’re easy to make and only use a small bit of fabric so they’re great for those little vintage scraps.
You can find a PDF of the towel topper pattern here.
You’ll need one 12″x 9″ scrap of fabric (or two 6″x 9″ ones). After you cut out the pattern, sew around the outside edge using 1/4″ seam allowance. Clip the inside curves and notch the outside curves. Turn right side out and press. Fold the open edge 1/2″ toward the inside and press.
Get your towel ready by trimming off any extra bulk at the top like fringe, tags or seams. Dress up a plain towel with some ribbon along the lower edge.
Arrange several tucks in the front along the top of the towel until it measures 4″ across. Insert the top of the towel into the topper about 1/2″. Pin or baste in place. Stitch across the topper opening about 1/4″ from the edge being sure to catch all layers. Top stitch all the way around the edge of the topper about 1/8″ from the edge. Make a button hole in the end of the tab and sew on your button. Your towel is finished and ready to be displayed and admired!